The Unicorn™ fixed-wavelength laser is a stable source of light at a user-specified wavelength. High power, low frequency drift and a choice of wavelength make this laser an excellent source for imaging, illumination, LIDAR and DIAL, stand-off detection, OPO seeding, and detector calibration applications. The laser is factory set with an accuracy of better than 1 cm-1 and can operate in either a pulsed or cw mode. Nearly complete coverage in the 4 to 12 µm region is now available with high-power and excellent beam quality and stability.
Features
- >70 mW at most wavelengths
- Up to 1 W at selected wavelengths
- Higher power versions at many wavelengths
- Pulsed or cw operation in same package
- Narrow linewidth: ≤30 GHz pulsed and ≤100 MHz cw
- Most Wavelengths Available
- No cryogenic cooling required
- Upgradable to tunable platform
Benefits
- High signal-to-noise results
- Contact factory for more information
- Versatile performance
- High resolution and discrimination
- Flexible platform enables many applications
- Convenient, deployable
- Economical path to more performance
Specifications
|
Operation
|
Pulsed and C
|
Peak Wavelengths Available1 (units in μm)
|
3.8, 4.2, 4.4, 4.5, 4.6, 4.9, 5.3, 6.1, 7.4, 7.8, 8.1, 8.8, 9.5, 10.4
|
Wavelength Set-point Accuracy
|
±1 cm-1
|
Linewidth (pulsed operation)
|
≤1 cm-1
|
Linewidth (cw operation)
|
≤ 100 MHz (0.003 cm-1)
|
Peak Pulsed or CW Power2
|
Up to 1 W depending on wavelength
|
Minimum Average Power
|
1 mW
|
Power Variation
|
<5% pulse to pulse
|
Pulsewidth3
|
40-500 ns
|
Repetition Rate
|
0.1-100 kHz (0.1 kHz increments)
|
Maximum Pulse Duty Cycle
|
≤5 %
|
Current Modulation
|
10 kHz – 2 MHz; ~0.05 cm-1 depth
|
Beam Divergence
|
<5 mrad
|
Polarization
|
Linear, Vertical, 100:1
|
Pointing Stability
|
<100 µrad
|
Spot Size
|
Spot Size
|
Beam Waist
|
30-50 cm from exit port
|
Beam Quality
|
TEM00
|
Control Specifications
|
Control Interface
|
1001-TLC Laser Controller
|
Triggering
|
Internal and external pulse, external triggering
|
External Control
|
RS-323, USB, GPIB
|
Operation Specifications
|
Operating Temperature
|
15-35 °C
|
Operating Humidity
|
10-90% RH, non-condensing
|
Power Requirements
|
100-240 VAC, 50-60 Hz, 1φ
|
Cooling Air
|
(pulsed), water (cw); no cryogenic cooling required
|
Mechanical Specifications
|
Head Dimensions
|
5.5” × 3.45” × 3.31” L × W × H
|
Controller Dimensions
|
10.51” × 8.50” × 4.00” L × W × H
|
Please register as a A&P member to see the documents!