EOT’s Amplified Photodetectors contain PIN photodiodes that utilize the photovoltaic effect to convert optical power into an electrical current and a fixed gain transimpedance amplifier allowing measurement of <1 mW input powers.
When terminated into 50 Ω into an oscilloscope, the pulsewidth of a laser can be measured. When terminated into 50 Ω into a spectrum analyzer, the frequency response of a laser can be measured.
EOT’s Amplified Photodetectors come with their own wall plug-in power supply. Plugging a coaxial cable into the photodetector’s SMA or BNC output connector and terminating into 50 Ω at the oscilloscope or spectrum analyzer is all that is required for operation.
FEATURES
• Built-in transimpedance amplifier
• Small footprint
• Bandwidth up to 10 GHz
• External wall plug-in power supply
APPLICATIONS
• Monitoring high repetition rate, externally modulated CW lasers
• Viewing <1 mW laser powers
OPTIONS
• Detector Material
• Active Area
• Fiber-coupled or free space options available
Specifications
|
|
Part No. (Model)
|
120-10013-
0001
(ET-2030A)1
|
120-10036-
0001
(ET-3000A)1
|
120-10060-
0001
(ET-3500A)1
|
120-10064-
0001
(ET-3500AF)1
|
120-10073-
0001
(ET-4000A)1
|
120-10077-
0001
(ET-4000AF)1
|
120-10115-
0001
(ET-5000A)¹
|
120-10116-
0001
(ET-5000AF)¹
|
Detector Material
|
Silicon
|
InGaAs
|
InGaAs
|
InGaAs
|
GaAs
|
GaAs
|
InGaAs
|
InGaAs
|
Rise Time/Fall Time (ps)
|
<50 / <500
|
<40 / <400
|
35 / 35
|
35 / 35
|
35 / 35
|
35 / 35
|
35 / 35
|
35 /35
|
Conversion Gain
|
450 V/W
at 830 nm
|
900 V/W at
at 1300 nm
|
2250 V/W
at 1310 nm
|
1620 V/W
at 1310 nm
|
1340 V/W
at 850 nm
|
970 V/W
at 850 nm
|
3250 V/W
at 2000 nm
|
2350 V/W
at 2000 nm
|
Power Supply (VDC)
|
24
|
24
|
5
|
5
|
5
|
5
|
5
|
5
|
Bandwidth
|
30 kHz to
1.2 GHz
|
30 kHz to
1.5 GHz
|
20 kHz to
10 GHz
|
20 kHz to
10 GHz
|
20 kHz to
10 GHz
|
20 kHz to
10 GHz
|
20 kHz to
10 GHz
|
20 kHz to
10 GHz
|
Active Area Diameter (µm)
|
400
|
100
|
32
|
32
|
60
|
60
|
40
|
40
|
Acceptance Angle
(1/2 angle)
|
10°
|
20°
|
15°
|
N/A
|
15°
|
N/A
|
20°
|
N/A
|
Noise Equivalent Power²
|
<60 pW/√Hz
at 830 nm
|
<30 pW/√Hz
at 1300 nm
|
25 pW/√Hz
at 1310 nm
|
30 pW/√Hz
at 1310 nm
|
35 pW/√Hz
at 850 nm
|
50 pW/√Hz
at 850 nm
|
20 pW/√Hz
at 2000nm
|
25 pW/√Hz
at 2000 nm
|
DC Monitor Output
|
1 mV/µA
|
1 mV/µA
|
1 mV/µA
|
1 mV/µA
|
1 mV/µA
|
1 mV/µA
|
|
|
Maximum Linear Rating
|
1.3 V peak
|
1.3 V peak
|
450 mVp-p
|
450 mVp-p
|
450 mVp-p
|
450 mVp-p
|
450 mVp-p
|
450 mVp-p
|
Mounting (Tapped Holes)
|
8-32 or M4
|
8-32 or M4
|
8-32 or M4
|
8-32 or M4
|
8-32 or M4
|
8-32 or M4
|
8-32 or M4
|
8-32 or M4
|
Output Connector
|
BNC
|
BNC
|
SMA
|
SMA
|
SMA
|
SMA
|
SMA
|
SMA
|
Fiber Optic Connection³
|
N/A
|
N/A
|
N/A
|
FC/UPC
|
N/A
|
FC/UPC
|
N/A
|
FC/UPC
|
Notes:
1. AC coupled.
2. Noise Equivalent Power (NEP) is determined via short circuit output.
3. Multi-mode fiber available. May limit bandwidth.
4. NOTE: All specifications apply for a 50 Ω termination unless otherwise noted.
Please register as a A&P member to see the documents!