HIGHLIGHTS include:
• A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application:
– RT – 1 150 °C, a cost effective solution mostly (but not only) for organic materials studies (polymers, pharmaceuticals, petroleum by-products…),
– RT – 1 600 °C, for demanding high temperature experiments involving mostly (but not only) inorganic materials like ceramics or metals.
• Plug & play TGA, DTA, DSC and CP rods for the best Simultaneous Thermal Analysis experience users can get.
Temperature Range |
Room temperature to 1 150 °C
Room temperature to 1 600 °C |
Isothermal temperature accuracy |
+/- 1 °C |
Programmable temperature scanning rate (heating and cooling) |
0.01 to 100 °C.min-1 |
Furnace cooling |
30 min (1150 °C to 50 °C)
32 min (1 600 °C to 50 °C) |
Maximum balance capacity |
20 g |
DSC rod – Resolution |
0.4 μW / 10 μW dependent on sensor |
3D Cp rod – Cp Accuracy |
|
< 2 %, value depends on tested material type |
|
Vacuum |
< 10-1 mbar |
Evolved Gas Analysis |
MS, FTIR, GC/MS coupling |
Gas Flow Control |
Two inlets for gas scanning (inert or reactive)
Option: 3 carrier gases (MFC from 4 to 200 ml/min) and 1 auxiliary or reactive gas (MFC from 0.3 to 16 ml/min)* |
Weight |
55 kg / 121 lbs |
Dimensions (Height / Width / Depth) |
56 closed, 76 opened / 53 / 58 cm (22.0 closed 29.9 opened / 20.8 / 22.8 in) |
Power requirements |
|
Please register as a A&P member to see the documents!