LHT 02/17 LB - LHT 02/17 LB Speed
Due to their maximum temperature of 1650 °C these models are perfectly suited for sintering of translucent zirconia. The electrically driven lift-bottom provides for easy charging. By using special heating elements made of molydenum disilicide crowns and bridges are protected against chemical contamination at the best. The charge will be placed in saggars made of technical ceramics. Up to three saggars on top of each other guarantee high productivity. Model LHT 02/17 LB Speed is additionally equipped with rapid cooling device. The table automatically opens stepwise for faster cooling. Depending on the charge and the type of saggars process times shorter than two hours can be realized.
● Tmax 1650 °C
● Special, high-quality heating elements made of molybdenum disilicide offer best possible protection against chemical interaction between charge and heating elements
● Furnace chamber lined with first-class, durable fiber materials
● Outstanding temperature uniformity due to all-round furnace chamber heating
● Furnace chamber with a volume of 2 liters, table with large footprint
● Electric screw drive with push button operation, automatic opening of Speed model for cooling possible
● Housing made of sheets of textured stainless steel
● Exhaust air vent in the roof
● Speed model with drying function. When starting the program the table will be driven in drying position and closes automatically at 500 °C
Electrically driven lift-bottom
Saggar
Additional equipment
● Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
● Square saggar for charging of up to three layers
● Process control and documentation with Controltherm MV software package
Model |
Tmax |
Inner dimensions in mm |
Volume |
Outer dimensions in mm |
Connected |
Electrical |
Weight |
|
°C |
Ø |
h |
in l |
W |
H |
D |
load kW |
connection* |
in kg |
LHT 02/17 LB |
1650 |
Ø120 |
130 |
2 |
540 |
610 |
740 |
3,0 |
single-phase |
85 |
LHT 02/17 LB Speed |
1650 |
Ø120 |
130 |
2 |
540 |
610 |
740 |
3,0 |
single-phase |
85 |
Please register as a A&P member to see the documents!