WinCamDTM-LCM
1" CMOS Beam Profiling Camera, SuperSpeed USB 3.0, 190 – 1605* nm
With an 11.3 x 11.3 mm active area, 4.2 MP, 5.5 x 5.5 μm pixels, optical and electronic triggering of a global shutter, and an update rate up to 60 Hz, the WinCamDTM-LCM series is ideally suited to both CW and Pulsed laser beam profiling. The new high resolution CMOS detector means no comet tailing and the shutter and trigger options simplify pulse capturing.
The LCM series is paired with DataRay's full-featured, customizable, user-centric software which has free software updates , no license fees, and offers unlimited installations.
675 nm SM fiber output on LCM4
Applications
● CW & Pulsed Laser Profiling
● Field Servicing of Lasers and Laser-based Systems
● Optical Assembly & Instrument Alignment
● Beam Wander & Logging
● M2 Measurements
● R&D
● Quality Control
● OEM Integration
● Fiber Laser Analysis
LCM Series
● λ Range: 190-1605 nm*
● Smallest pixel: 5.5×5.5 μm*
● Smallest beam: 55 μm**
● Imaged areas: 11.3×11.3 mm*
*Camera/sensor dependent
**Direct measurement without additional optics
● WinCamDTM-LCMSeries Camera With new MagNDTM Filter
Shown actual size
1.8×1.8×0.8“
46×46×20 mm
System Features
● 355 to 1150 nm, CMOS detector, 190 to 1605 nm options
● 4.2 MPixel, 2048 x 2048 pixels, 11.3 x 11.3 mm active area
● 5.5μm pixels
● 12.5 FPS @ 2048 x 2048
● 50 FPS @ 512 x 512
● Port-powered USB 3.0/2.0; 3 m cable, no power brick
● HyperCalTM Dynamic Noise and Baseline Correction software
● New MagNDTMstackable magnetic ND filters or C-Mount filters options
● 2,500:1 Signal to RMS Noise (34/68 dB optical/electrical)
● Global shutter with optical and TTL trigger
● Electronic auto-shutter, 79 μs to 2 sec ( 44dB)
● 12-bit ADC
● Isolated Pulse Triggering and Parallel capture on multiple cameras
● Field-replaceable image sensors
● Window-free sensors standard for no fringing
● M2 option
Software Features
● XY profiles and centroids
● Background capture and subtraction
● Linear and Logarithmic displays
● Image & Intensity Zoom
● Gaussian and Top Hat least squares fits
● Linear and area filters
● Ellipse Angle, Major, Minor, Mean Diameters
● Image Averaging, 1 to continuous
● ISO11146 compliant
● Proprietary HyperCalTM Dynamic Noise and Baseline Correction
WinCamD-LCM Model Specifications
WinCamDTM |
--LCM4 |
--LCM2 |
--LCM1 |
Pixel Count &
|
4.2 M Pixel |
2.1 M Pixel |
1 M Pixel
|
H&V |
2048×2048 |
1664×1280 |
1024×1024 |
Sensor image area (mm) |
11.3×11.3 |
9.2×7.0 |
11.3×11.3 |
Pixel dimension (μm) |
5.5 × 5.5 |
5.5 × 5.5 |
11 × 11 |
Min. beam (10 pixels) |
55μm |
55μm |
110μm |
Shutter type |
Global |
Global |
Global |
Full Frame Rate |
>=12.5 Hz |
>= 20 Hz |
>= 25 Hz |
Frame rate @ 512×512 |
>= 50 Hz |
>= 50 Hz |
>= 50 Hz |
Max.'every pulse' PRR
|
>=12.5 Hz |
>= 20 Hz |
>= 25 Hz |
Single pulse capture PRR
|
12.5 kHz |
12.5 kHz |
12.5 kHz |
Signal to RMS Noise
|
2500:1
|
2500:1
|
2500:1
|
Opt./Elec. *dB
|
34/68 dB*
|
34/68 dB*
|
34/68 dB*
|
Electronic Shutter Dynamic Range
|
44 dB
|
44 dB
|
44 dB
|
ADC
|
12 bit
|
12 bit
|
12 bit
|
Interface |
USB 3.0/2.0** |
USB 3.0/2.0** |
USB 3.0/2.0** |
*OK, we consider that quoting electrical dB for optical SNR is not appropriate, but some suppliers do this, so we offer a comparable specification.
**Compatible with USB 2.0, however, performance is reduced.
Please register as a A&P member to see the documents!